Diestco Powerchair Cover


Item # R-V1331 – Large Heavy Duty, 38″H x 23″W x 44″L.

1 in stock



600x300 polyester with PVC backing provides the highest level of protection from the elements for your powerchair. Works great on lifts or for just storing your powerchair outside!

NOTE: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced. Damage to your cover following misuse is not covered under any warranty. See our Policies page for more info.

The cover will provide protection for your vehicle (scooter/ wheelchair) from the weather and dust. Yet, it is lightweight and easy to get on and off!

Slip the cover over your vehicle and pull the elastic down under your chassis. Pull the chord lock so that it is tight around the bottom. For extra security, when transporting your vehicle on the back of your car or van, tie down the bottom by hooking bungee-type cords (not included) through the bottom belt loops.

Note 1: This is a Heavy Duty cover, you will have a 1" webbing belt through belt loops to tighten.

Note 2: Depending on your vehicle, cover may not fit over wheels.

Note 3: *These statements are intended to be used as a guide line when deciding which cover would work best for you. Some powerchair models may vary.

Types of powerchairs this cover will fit - Not a 100% complete list, your powerchair may not be on this list yet.


Jazzy Elite 14
Jazzy Elite ES
Jazzy Elite HD
Jazzy Select Elite HD
Jazzy 600 ES
Jazzy 1100
Jazzy 1120
Jazzy 1121
Jazzy 1122
Jazzy 1143
Legend XL


Teknique FWD
Teknique XHD
Teknique RWD
Teknique GT
Teknique HD6
Pronto M51